Power
04-28-2005, 05:10 PM
adamlar yapıyor. 1000hp m3,350hp z4, şimdi de 440 hp M roadster;
http://www.da-motorsport.com/projeler/mz3/mz3-1.jpg
- M Roadster Supercharged S50B32 by DA MOTORSPORT
- Engine code: S50B32 (European version, standard engine 321 hp-350 nM)
- Boost pressure: 8,5 psi (0,58 bar)
- Compression ratio: 11,3:1 (standard compression ratio)
- Maximum engine speed: 8.200 rpm (standard 7.600 rpm)
- Horsepower 440 hp
- Torque 480 nM
- Performance figures are as follows:
- 0-100 km/h 4,2 seconds
- 0-160 km/h 9,3 seconds
- 0-200 km/h 14,3 seconds
- Top speed 305 km/h (190 mph)
- Perfmormance data are obtained by a Greek Automobile Magazine with V BOX of RACELOGIC.
- DA MOTORSPORT M Roadster supercharger kit includes ASA Infinitas supercharger unit. The rest of the system is designed and produced by DA MOTORSPORT.
- This supercharger kit can be used on E36 M3 3.0L Euro version (S50B30), E36 M3 3.2L Euro version (S50B32), M Coupe Euro version (S50B32) and M Roadster Euro version (S50B32). This supercharger kit cannot be installed on US version M Roadster.
- After seven years of research, design and testing DA MOTORSPORT is proud to release the S50B32 supercharger kit. We have tested over 30 "compression ratio vs boost pressure" combinations on the S50B32. For a daily driven supercharged M3 we found out that standard compression ratio of 11,3:1 and 8,5 psi of boost pressure yield the best "performance, driveability and low engine speed torque".
- DA S50B32 supercharger kits utilize ASA Infinitas superchargers which are known to be the best.
- ASA Infinitas superchargers' high ratio internal transmissions, 15:1, enable to rev the supercharger 120.000 rpm. Other brands of superchargers have lower internal transmission ratios such as 3,45:1. As a comparison, ASA Infinitas superchargers build boost at lower engine speeds than other superchargers. This feature of ASA translates into more power and torque at low engine speeds.
-ASA Infinitas superchargers' belt system is designed to survive under racing conditions. Supercharger drive belt system allows a limited amount of belt slippage during fast down-shifting of gears and preserves the life of the v-belt.
- DA Motorsport S50B32 superchargers are HD version. HD version superchargers are equipped with ceramic ball bearings instead of conventional bearings. Ceramic ball bearings allow high supercharger speeds of 120.000 rpm.
- In order to find the best supercharger we have tested different brands such as Vortech S Trim and T Trim. Only ASA Infinitas superchargers survived under racing conditions.
- DA MOTORSPORT S50B32 Supercharger kit installed on M Roadster.
DA MOTORSPORT M ROADSTER SUPERCHARGER KIT CONTENTS
- ASA Infinitas supercharger, TM I 20 hd
- Supercharger pulley, billet aluminium
- Supercharger clutch KO7
- Supercharger bracket
- Bracket brace kit
- Supercharger oil feed line, braided stainless steel
- Supercharger oil return line, braided stainless steel
- DA Motorsport modified v-belt tensioner
- Heavy duty supercharger v-belt
- Front mount intercooler, aluminium
- Intercooler pipes, stainless steel 314
- Silicon hoses
- Cross bolt clamps, stainless steel 314
- Turbosmart blow off valve
- Blow off valve connecting hose kit
- 6 larger capacity fuel injectors
- TSI engine management system
- TSI internal map sensor 22 psi
- TSI internal map sensor hose and clamp
- TSI wiring harness
- Hand made racing catalytic converters, stainless steel 314
- Hand made rear mufflers, free flow, stainless steel 314
- DA MOTORSPORT M Roadster supercharger kit includes ASA Infinitas supercharger unit. The rest of the system is designed and produced by DA MOTORSPORT
Supercharger and supercharger clutch installed on the bracket.
- ASA Infinitas supercharger, TM I 20 hd
- Maximum supercharger speed 110.000 rpm
- Air flow 2.000 kg/hour
- Compressor housing intake diameter 70 mm
- Compressor housing discharge diameter 60 mm
- Supercharger clutch KO7. ASA superchargers have clucth systems which engage the supercharger above 1.100 rpm. This special feature enables smooth drivability in stop-and-go traffic and during parking where no supercharger is needed.
Intake Manifold Kit
- Intake manifold production starts from scratch.
- Aluminium is used to withstand high boost pressures.
- Runners' length are designed to improve air flow at high engine speeds such as 9.000 rpm.
http://www.da-motorsport.com/projeler/mz3/P3040062.jpg
http://www.da-motorsport.com/projeler/mz3/mz3-1.jpg
- M Roadster Supercharged S50B32 by DA MOTORSPORT
- Engine code: S50B32 (European version, standard engine 321 hp-350 nM)
- Boost pressure: 8,5 psi (0,58 bar)
- Compression ratio: 11,3:1 (standard compression ratio)
- Maximum engine speed: 8.200 rpm (standard 7.600 rpm)
- Horsepower 440 hp
- Torque 480 nM
- Performance figures are as follows:
- 0-100 km/h 4,2 seconds
- 0-160 km/h 9,3 seconds
- 0-200 km/h 14,3 seconds
- Top speed 305 km/h (190 mph)
- Perfmormance data are obtained by a Greek Automobile Magazine with V BOX of RACELOGIC.
- DA MOTORSPORT M Roadster supercharger kit includes ASA Infinitas supercharger unit. The rest of the system is designed and produced by DA MOTORSPORT.
- This supercharger kit can be used on E36 M3 3.0L Euro version (S50B30), E36 M3 3.2L Euro version (S50B32), M Coupe Euro version (S50B32) and M Roadster Euro version (S50B32). This supercharger kit cannot be installed on US version M Roadster.
- After seven years of research, design and testing DA MOTORSPORT is proud to release the S50B32 supercharger kit. We have tested over 30 "compression ratio vs boost pressure" combinations on the S50B32. For a daily driven supercharged M3 we found out that standard compression ratio of 11,3:1 and 8,5 psi of boost pressure yield the best "performance, driveability and low engine speed torque".
- DA S50B32 supercharger kits utilize ASA Infinitas superchargers which are known to be the best.
- ASA Infinitas superchargers' high ratio internal transmissions, 15:1, enable to rev the supercharger 120.000 rpm. Other brands of superchargers have lower internal transmission ratios such as 3,45:1. As a comparison, ASA Infinitas superchargers build boost at lower engine speeds than other superchargers. This feature of ASA translates into more power and torque at low engine speeds.
-ASA Infinitas superchargers' belt system is designed to survive under racing conditions. Supercharger drive belt system allows a limited amount of belt slippage during fast down-shifting of gears and preserves the life of the v-belt.
- DA Motorsport S50B32 superchargers are HD version. HD version superchargers are equipped with ceramic ball bearings instead of conventional bearings. Ceramic ball bearings allow high supercharger speeds of 120.000 rpm.
- In order to find the best supercharger we have tested different brands such as Vortech S Trim and T Trim. Only ASA Infinitas superchargers survived under racing conditions.
- DA MOTORSPORT S50B32 Supercharger kit installed on M Roadster.
DA MOTORSPORT M ROADSTER SUPERCHARGER KIT CONTENTS
- ASA Infinitas supercharger, TM I 20 hd
- Supercharger pulley, billet aluminium
- Supercharger clutch KO7
- Supercharger bracket
- Bracket brace kit
- Supercharger oil feed line, braided stainless steel
- Supercharger oil return line, braided stainless steel
- DA Motorsport modified v-belt tensioner
- Heavy duty supercharger v-belt
- Front mount intercooler, aluminium
- Intercooler pipes, stainless steel 314
- Silicon hoses
- Cross bolt clamps, stainless steel 314
- Turbosmart blow off valve
- Blow off valve connecting hose kit
- 6 larger capacity fuel injectors
- TSI engine management system
- TSI internal map sensor 22 psi
- TSI internal map sensor hose and clamp
- TSI wiring harness
- Hand made racing catalytic converters, stainless steel 314
- Hand made rear mufflers, free flow, stainless steel 314
- DA MOTORSPORT M Roadster supercharger kit includes ASA Infinitas supercharger unit. The rest of the system is designed and produced by DA MOTORSPORT
Supercharger and supercharger clutch installed on the bracket.
- ASA Infinitas supercharger, TM I 20 hd
- Maximum supercharger speed 110.000 rpm
- Air flow 2.000 kg/hour
- Compressor housing intake diameter 70 mm
- Compressor housing discharge diameter 60 mm
- Supercharger clutch KO7. ASA superchargers have clucth systems which engage the supercharger above 1.100 rpm. This special feature enables smooth drivability in stop-and-go traffic and during parking where no supercharger is needed.
Intake Manifold Kit
- Intake manifold production starts from scratch.
- Aluminium is used to withstand high boost pressures.
- Runners' length are designed to improve air flow at high engine speeds such as 9.000 rpm.
http://www.da-motorsport.com/projeler/mz3/P3040062.jpg